Creating an environment where you can control the temperature, pressure, as well as humidity of the air, is critical in most experiments. Special devices like the ones from Temptronic’s can help you create a controlled environment for your lab work easily. Globetek is the proud distributor of Temptronic’s ThermoStream products that help you control the environment of a closed chamber.

Temptronic’s devices are highly portable and can help you generate fresh, clean as well as dry air for testing purposes. The air from these devices can be used for temperature testing as well as conditioning of electronic items like ICs, MEMS, transceivers, etc. With precise control modules, you can easily control the temperature of the closed chambers with exceptional precision levels.

Some of the important features of the ThermoStream products include:

  • Rapid cooling as well as heating to attain a long period of saturation
  • Exceptional characterization as well as verification of temperature-sensitive data
  • Handle thermal shock and failure analysis applications
  • No requirement for liquid carbon dioxide or nitrogen
  • Accuracy up to 1.0°C
  • Purging systems to prevent moisture buildup on DUTs
  • Portable use for applications on the test bench as well as production floors
  • Wide active temperature ranges all the way from –100°C to 300°C
  • Easily programmable transitions with remote control

500 & 600 Series Mobile Temperature Environments

1  2 3 4
Model ATS-505,605 ATS-515,615 ATS-525,625 ATS-535,635 ATS-545,645
LN2 or LCO2 not required
Temperature Range (at thermal head) -20 to +225°C -45 to +225°C -60 to +225°C -80 to +225°C
System Airflow Output 4 to 10 scfm (1.9 to 4.7 l/s) 4 to 10 scfm (1.9 to 4.7 l/s) 5 scfm (2.4 l/s) Fixed Flow 5 scfm (2.4 l/s) Fixed Flow 4 to 18 scfm (1.8 to 8.5 l/s) Continuous
Transition Rates 0 to +125°C, < 3 min +125 to 0°C, < 4 min -40 to +125°C, < 12 sec +125 to -40°C, < 40 sec -40 to +125°C, < 12 sec +125 to -40°C, < 40 sec -40 to +125°C, < 12 sec +125 to -40°C, < 40 sec -55 to +125°C, < 10 sec +125 to -55°C, < 10 sec
Temperature Display & Resolution ±1°C ±1°C ±1°C ±1°C ±1°C
Temperature Accuracy ±1°C ±1°C ±1°C ±1°C ±1°C
Directly Control Device Under Test (DUT)
DUT Control Sensors Type T or K Thermocouples Type T or K Thermocouples Type T or K Thermocouples Type T or K Thermocouples Type T or K Thermocouples
Remote interface IEEE.488, RS232 IEEE.488, RS232 IEEE.488, RS232 IEEE.488, RS232 IEEE.488, RS232
Thermal Cap with protection from condensation at DUT site
Compact, portable system Fits bench top Easily integrates to bench top Easily integrates to bench top LabView™ drivers LabView™ drivers
CE Compliant and CFC-free
Facility requirements CDA at 90 psi minimum; Various power requirements available 130-240 VAC, 50/60Hz Built-in compressor; No facility air needed Same as ATS-505 to 625

700 & 800 Series Mobile Temperature Environments

8 7 6 5
Model ATS-710, 810 ATS-730,830 ATS-750,850 ATS-770,870
LN2 or LCO2 not required
Temperature Range (at thermal head) -80 to +225°C -90 to +225°C -90 to +300°C -100 to +225°C
System Airflow Output 4 to 18 scfm (1.8 to 8.5 l/s) Continuous 4 to 18 scfm (1.8 to 8.5 l/s) Continuous 4 to 18 scfm (1.8 to 8.5 l/s) Continuous 4 to 12 scfm (1.8 to 5.6 l/s) Continuous
Transition Rates -55 to +125°C, < 10 sec +125 to -55°C, < 10 sec -55 to +125°C, < 10 sec +125 to -55°C, < 10 sec -40 to +125°C, < 12 sec +125 to -40°C, < 40 sec -55 to +125°C, <10 sec +125 to -55°C, <10 sec
Temperature Display & Resolution ±1°C ±1°C ±1°C ±1°C
Temperature Accuracy ±1°C ±1°C ±1°C ±1°C
Directly Control Device Under Test (DUT)
DUT Control Sensors Type T or K Thermocouples, RTD (100 Ohm) Type T or K Thermocouples Type T or K Thermocouples Type T or K Thermocouples, RTD (100 Ohm)
Remote interface IEEE.488, RS232 IEEE.488, RS232 IEEE.488, RS232 IEEE.488, RS232
Thermal Cap with protection from condensation at DUT site
LabView™ drivers
CE Compliant and CFC-free
Heated Defrost -
Reduced Power Mode - heat only when using cold temperatures -
Automatic Power Reduction - reduce power usage during idle time -
Mechanical Arm or Turret Configuration
Optional Extended Height & Reach configuration for Mechanical Arm
Thermal Cap size options & Flexhose to connect external thermal chamber or test enclosure
Facility requirements CDA at 90 psi minimum; Various power requirements available 130-240 VAC, 50/60Hz
Enquiry

Send us an email and we'll get back to you, ASAP.

Questions, issues or concerns? I'd love to help you!

Click ENTER to chat