PRODUCT CATEGORY

AC/DC Current Probes and Clamp Meters

GMC-I Prosys builds a wide range of Hall-effect and Rogowski current-sensing probes and clamp meters. Supporting up to 6000 A standard with industry-leading reliability.

OUR PRINCIPALS

Partner of GMC-I Prosys, United Kingdom

GMC-I Prosys, based in Skelmersdale, Lancashire, designs and builds current probes and clamp meters for automotive, electrical utility, power quality and test and measurement work. Its engineers bring 30 years of experience in sensing technologies. Globetek brings the range to India.

Up to 6000 A standard

Flexible AC probes

DC to 100 kHz

Hall-effect probes

1 mA

Resolution

THE BIG WHY

Why choose GMC-I Prosys

Hall-effect and Rogowski current sensing across power electronics, automotive, and process-control installations in Indian facilities. From a 30 A bench probe to a 6000 A industrial clamp, chances are we’ve matched it before.

  • Two sensing technologies
    01 Two sensing technologies
    Hall-effect probes measure AC and DC current, and Rogowski coil probes measure AC current up to 6000 A standard.
  • Clean signals
    02 Clean signals
    Superior noise rejection, wide bandwidth and low phase shift suit inverter and switch mode power supply work.
  • Local support
    03 Local support
    Globetek's Bengaluru team helps with model selection, custom requirements and quotations.
APPLICATIONS

Where Globetek meets the industry

Electronic technician wearing blue protective gloves while testing a circuit board with red and black probes, using digital measuring equipment for electronic diagnostics and troubleshooting.

Power Electronics

Switching waveforms in inverters and switch mode power supplies need accurate, non-intrusive current measurement.

GMC-I Prosys AC/DC and flexible current probes read AC, DC and complex waveforms on a scope with low phase shift, so engineers see true current behaviour in industrial controls.

Automotive technician using a handheld diagnostic scanner to inspect a vehicle engine in a workshop for fault detection and engine performance analysis.

Automotive

Cranking current, current profiling and leakage checks call for high accuracy and resolution on live circuits.

GMC-I Prosys current probes clamp onto a battery lead or harness to profile cranking current, leakage current and ECU sleep mode draw without disconnecting anything.

Electrical technician wearing a white safety helmet and protective glasses while inspecting an industrial electrical control panel using a digital monitoring tablet.

Installation and Maintenance

Industrial and residential electrical installations need leakage current and transient checks before and during use.

GMC-I Prosys probes and clamp meters test installations, measure leakage current and catch motor starting transients on site.

High-voltage electrical transmission towers carrying overhead power lines across a clear blue sky for electricity distribution.

Power Quality and Energy Management

Harmonics, peak loads and continuous load monitoring are central to power quality and energy work.

GMC-I Prosys current probes and DIN rail systems analyse harmonics, measure power and peak loads in mains and UPS systems, and monitor load continuously in industrial plants.

Electric vehicle charging station connected to a modern silver electric car using a blue charging cable in an indoor charging facility.

Process Control and Battery Systems

Current loop verification and battery charging systems need a dependable, non-intrusive current reading.

GMC-I Prosys probes verify 4 to 20 mA current loops and keep watch over UPS and battery charging systems.

Scroll to Top