FROM OUR PRODUCT RANGE

High Voltage Components: Surge Testers

SPS Electronic surge tester featuring a digital waveform display, keypad controls, rotary adjustment dial, and electrical output terminals for surge testing applications.

ST 4000A

  • Surge Voltage 100 V to 6 kV, 250 MHz sample rate
  • Rise Time 3.5 ns
  • Insulation Up to 600 GΩ at 100 V to 6 kV DC
  • High Voltage DC Test Short-circuit current below 12 mA
  • Evaluation Error area, differential error area, tolerance band
  • Format 19" device, 6 HU

Overview

The ST 4000A is a fast surge tester that also performs insulation and DC high voltage testing in the same 19-inch device. It records the surge waveform at 250 MHz with a 3.5 ns rise time, in fine detail, so it picks up winding faults in motors, coils and stators that slower testers can miss. Trained auxiliary personnel can operate it in the test field or on the production line.

The same platform is available as the ST 4000B, which adds partial discharge measurement and an AC high voltage test.

Specifications

  • Recording time: 1 µs to 160 ms
  • Surge capacity: 18 nF (optional 40, 100, 200 nF)
  • Insulation: from 0.25 MΩ
  • HV DC test: 100 V to 6,000 V at 10 mA
  • Resistance (optional): 20 mΩ to 200 kΩ
  • Interfaces: USB, Ethernet, DisplayPort, PT100, TNC (ST 4000B)
  • Safety: emergency stop, charge below 350 mJ (standard 18 nF surge capacitor)
  • Supply: 90 V to 253 V, 50 Hz / 60 Hz, max. 660 VA

Additional Information

  • The device measures approximately 550 x 600 x 320 mm (19 inch, 6 HU) and weighs approximately 54 kg.
Scroll to Top