Select Model
AC Transformer Current Probes
- Current Range 200 A – 3000 A
- Conductor Cable Ø15–Ø70mm or busbar
- Bandwidth 5 kHz or 10 kHz
- Output 10 or 1 mV/A
- Connector 4mm
- Power Supply None needed
Overview
GMC-I Prosys AC transformer probes suit power quality work and long-term monitoring where a battery or mains supply is impractical. The probe clamps onto a cable or busbar and delivers a signal proportional to the current, with low phase shift for monitoring the energy use of electrical machines.
They measure alternating current without breaking the circuit, using the AC transformer principle on rectangular busbars or cables, and need no battery or external power supply. Probes can be configured with one, two or three measuring ranges, with outputs available as AC or DC voltage or as 1 A or 5 A current signals; the transformer range suits measurement from a few mA up to 3200 A, so ask us about ranges beyond the three models shown.
Model table
| Part no. | Model | Current range | Max conductor | Bandwidth | Output | Connector | Power |
|---|---|---|---|---|---|---|---|
| P-00.440.2 | ACP 200 M3 | 200 A | Ø15 / 15 x 17 mm | 10 kHz | 10 mV/A | 4 mm | None needed |
| P-00.600.1 | ACP 1000 SM | 1000 A | Ø54 / 51 x 12 / 40 x 35 mm | 10 kHz | 1 mV/A | 4 mm | None needed |
| P-00.710.1 | ACP 3000 H32 | 3000 A | Ø70 / 100 x 45 / 120 x 37 mm | 5 kHz | 1 mV/A | 4 mm | None needed |
While you are here
More from our Current probes and Clamp Meter Range
Send us a message to see the full catalogue >