FROM OUR PRODUCT RANGE

Hipot Safety Analyzers: KT Series

SPS Electronic KT 1880B electrical safety tester featuring a digital display, keypad controls, red and green status indicators, power switch, and emergency stop button for electrical safety testing.

KT 1880B

  • AC Hipot 100 V to 5.5 kV / 3 mA
  • DC Hipot 100 V to 6 kV / 10 mA
  • Insulation 250 kΩ to 1 GΩ
  • Ground Bond 10 A to 30 A AC
  • Display 4.3" colour TFT
  • Format 19" rack device

Overview

The KT 1880B combines AC and DC high voltage testing, insulation measurement, ground bond, equivalent leakage current, function and continuity testing in a single 19-inch rack device. It is built for fast, cost-effective safety testing in line with IEC, EN, UL and VDE standards. Test programs are individually configurable, so a fully automatic test plan can be created for each product. The device under test is connected once and the full safety sequence runs automatically, which removes time-consuming reconnection between tests.

A 4.3-inch colour TFT display keeps operation simple, and the 19-inch format fits both the test bench and a rack-mounted test station.

Specifications

  • AC hipot: 100 V to 5,500 V, 0 to 3 mA, short-circuit current below 3 mA
  • DC hipot: 100 V to 6,000 V, 0 to 10 mA, short-circuit current below 12 mA, ripple below 3%
  • Insulation measurement: 100 V to 6,000 V DC, 250 kΩ to 1 GΩ (voltage-dependent)
  • Ground bond: 0 to 0.4 Ω at 10 A to 30 A AC
  • Equivalent leakage current: 0 to 10 mA at 100 V to 270 V AC
  • Continuity: 0 to 600 mA
  • Function test: 4 A AC power consumption (optional 1 A, 10 A, or 16 A)
  • Interfaces: 2 x USB, RS 232, Ethernet/LAN, digital 24 V DC with 8 inputs and 8 outputs
  • Mains supply: 90 V to 250 V, 50 Hz / 60 Hz

Additional Information

  • Tests follow IEC, EN, UL, and VDE standards. The unit measures approximately 222 mm high, 483 mm wide, and 491 mm deep, and weighs approximately 20 kg (44.1 lbs). Subjective test steps can be added as text prompts for operator checks.
Scroll to Top